Samsung SmartTag: What is it and how to replace its battery

The Samsung SmartTag is a small, Bluetooth tracker that can be attached to your keys, wallet, or other belongings. It uses Bluetooth Low Energy (BLE) to connect to your smartphone, and you can use it to find your lost items by making your phone ring or by tracking its location on a map.

The SmartTag uses a CR2032 battery, which is a small, coin-shaped battery that is commonly used in watches and other devices. The battery life is typically about 2 years, but it may vary depending on how often you use the SmartTag.

To replace the battery in your Samsung SmartTag, follow these steps:

1. Locate the small notch on the bottom of the SmartTag.
2. Insert the tip of your finger or a flat object into the notch and pry open the cover.
3. Remove the old battery and discard it properly.
4. Insert the new battery, making sure that the positive and negative terminals are aligned correctly.
5. Snap the cover back into place.

That’s it! Your Samsung SmartTag is now ready to use with a new battery.

Here are some additional tips for replacing the battery in your Samsung SmartTag:

• Make sure that you purchase a genuine CR2032 battery. Using a counterfeit battery could damage your SmartTag.
• Be careful not to bend or damage the battery terminals when you are replacing the battery.
• If you are having trouble opening the cover, you can use a small screwdriver to pry it open.